CraftsmanCapitol™ Premium Digital Height Gauge

• Saving time and no more hassle with your project
• All orders ship out within 12-24 hours
• 100% Money-Back Guarantee

This CraftsmanCapitol™ Premium Digital Height Gauge is designed to perform a variety of useful measurement applications, including bore and slot depths, hand routers, router tables, and table saws. Inch, millimeter, and inch fractions can be viewed with the simple touch of a button. There's no need to 'eyeball' your measurements, you can simply view the large LCD screen. Enjoy the simplification provided via the digital technology in this mini digital height gauge.

Features:

• HEIGHT & DEPTH GAUGE: The Measuring Range of Height is up to 80mm(3.14in, 3 1/8 inch) While The Measuring Range of Depth is up to 50mm (2 inches). The Accuracy is 0.10mm / 0.004 inch (<100mm) and The Resolution is 0.05mm / 0.002 inch.
• THREE MODES: Can Be Use to Measure mm, inch and Fraction (Fraction Only Display When Accuracy is within +/-0.002). Especially Suitable for Milling Cutter, Table Saw, Router and Many Kinds of Woodwork.
• MULTIFUNCTIONAL: With ABS / INC Measuring Function That Can Be Used for Both Absolute Value Measure and Increased Value Measure.
• MAGNETIC STAND:The Stand Is Magnetic, Which Can Be Attached to Some Iron Object (NOTE: The Magnet Seem to Be Small As The Picture Shows).
• DIGITAL GAUGE: Equipped with Large LCD Screen to Show Measuring Results Quickly. Power by 1 x 3V CR2032 Battery (NOTE: The Battery is NOT Included).

How to Use:

• Turn it on: The ON/OFF button must be pressed for about 3 seconds to turn the device on or off. The gauge automatically shuts off if left idle for 5 minutes.
• Take your pick: Easily navigate between inches, millimeters, and inch fractions by pressing the button in the center.
• Gauge your woodwork: To establish accurate measurements on a band saw when doing woodwork such as a fence, simply set the digital height gauge to the desired measurement and place it on the band saw up against the fence. Scoot the fence towards the legs of the digital height gauge to make contact if necessary.
• Measure the max height of your saw: Table saws can also be measured to establish their maximum height. Simply place the digital height gauge on top of the blade. Rotate the blade until it catches the height gauge, then raise the gauge slightly so it is touching the tip of the blade. Repeat the process until you’ve established the maximum height of the table saw.