Brent M.
was a little finicky out of the box. Took some time to adequately reset but eventually the guage performed as advertised. Perfect size and magnet worked as advertised.
Isaiah L.
Initially it wouldn't zero. I removed and replaced the (new) battery several times and it would display an error or not zero. I finally put another battery in, and it worked. The first battery was apparently bad, but it worked OK in a flashlight. It will make saw setups faster because I won't have to measure and compensate for scale inaccuracies.
Bill T.
Initially when I put the batteries in I was not too happy because there wasn’t anything “magnetic” about it but after a few minutes they worked. I guess they must be electromagnets and took a little for them to function. Otherwise it seems it works quite well though I have little use for it yet.
Ted M.
Seems to be way more accurate than scale on my table saw. Table saw was 2° off at 90° and obviously 45° too.
Joel H.
I am not able to 0.0 out the unit. I did the re calibration and I get 0.1 as it sits but when I turn the unit 180 degrees I get 0.4. What am I doing wrong?
Lonnie S.
good quality fast service
Gregory B.
Directions could be a lot better
Jack L.
It's okay if I had known it was made in China I would not have ordered it.
ronaldsteinhorst@outlook.com S.
I am happy to have purchased this tool. It will make my set up time a lot faster and more accurate. I have a project that has several angles and when I get it set up I can cut my pieces with accuracy. Good tool, I would recommend it to any woodworker.
Ron S.
Timothy R.
I like the product but the length of time it took to get it is ridiculous! I would order again as soon as you get the shipping more efficient and faster!!
FLOYD Q.
If I had known it was coming from China, I never would have bought it.
Ray C.
I like the gauge but that being said would really appreciate being told shipping is from out of country and takes so long.
Darrell B.
Disappointed it was given as a birthday gift but you were not able to mark it as such. Don’ know how the receiving party liked it?? My son didn’t know who sent it??? I probably won’t do that again. Thanks
Rod R.
I received it last week but have not gotten a chance to use it as yet.
Matthew D.
So far so good. Nice knowing my saw is set at the exact angle every time...
James B.
Works as advertised. Good tool.
Timothy M.
I've not had opportunity to use this gauge as yet but will do so the next time I am involved in a project requiring an angle adjustment on a saw or similar tool.
Timothy B.
Awesome website. Easy to navigate. Will definitely recommend this site and the tools they sell
Robert K.
This product is fantastic for getting accurate angle cuts. I build a lot of things with angels so this is going to make my job of accuracy much easier. No more cut and re-cut until you get it accurate.
john s.
I haven't had an opportunity to use this product yet. Pre-usage comments are: 1.) I did not receive this for several weeks after ordering. Other products I ordered came in a week or less. 2.) The instructions are overly complicated. I do not understand the Relative Meas. Mode. Most woodworkers just want a simple angle measurement. 3.) I was not made aware that this instrument will not work at above 85% humidity. I live in a sub tropical area where this often occurs.
Kenneth S.
Just what I was looking for. Only had it for a week, but comes in very handy
Tabita K.
This was a birthday present for my husband. He hasn’t used it yet, but is looking for to using the level!
David H.
Seems to work as advertised I’ve gotten 30,45,and 90 degree accuracy just takes a little figgiting
TED S.
Haven't used it yet
Rene H.
so far great product
Ernest K.
Perfect for getting the exact cut on baseboard, crown, and chair molding !
Justin G.
Just got my 4 piece combo square today. I can’t wait to put it to use!
Laurie V.
Bought for my hubby. He's happy so I'm happy!
James B.
Took a chance and purchased 2. Not disappointed. Out of the box 100% perfect. 5 star accuracy. Well constructed. NOT a cheap plastic enclosure as one might expect. Will definitely recommend to others.
Al C.
I bought one for me and one for my son. Arrived in a reasonable time. Seems to work as described. I say it is a good deal at a fair price.
Bobby .
Have not used it yet but it looks ok.
JAMES B.
Misleading add. Only reason purchased was advertised as made in U.S.A. Read closer, made in "CHINA". Haven't tried using it yet but this company sucks in my old butt 60 year old ass for their un AMERICAN LIES!!!
daryl m.
Works better than expected
John W.
As a portrait artist, accurately measuring angles is important to getting a likeness. I use the device, attached to a knitting needle, to determine the correct angle and translate it to the paper...
William M.
I'm a metal sculptor and ma working with setups all the time. Being able to strike an angle with pieces on the table is a great help.
Lincoln M.
Was exactly what I wanted.
Joseph W.
Product is great, Service is not
Kenneth E.
It is exactly as advertised and is extremely efficient the multi function measuring and determining a remaining angle is quite unique with this tool and is a pleasure to work with I would recommend it to anyone with adjustable blades as in tablesaws much appreciated the opportunity to voice an opinion and would also advise that my next interest is in the multipurpose grinder blade !
Kurt Z.
Seems to work fine, slow shipping
Dan S.
I KNEW my new miter saw wasn't right. 46.4° one way, 46.1° the opposite. Even my 90° cut was off 0.4°.
THIS is why I wanted this! Now, I'm confident that my cuts will fit perfectly.
Robert M.
Very neat little tool. Easy to adjust and use. And quite precise too. Nice addition to my tool box.
Les S.
I've gotten much better joints sense I've used it on my saws
Jesse W.
I like it small get in small place .
Carl B.
Looks good and seems accurate. I will use it on my next project.
Larry E.
easy to operate , didn't take weeks to get like most things, came in just a few days!
Ron S.
good tool......have not checked accuracy yet....took way to long to recieve order.
Jerry G.
it's repeatable for angular measurement to 0.1 degree. The display cannot be read unless you are looking directly at it perpendicular to the screen. The magnets in the base are weak and there are no magnets on the sides that would improve it's usability.
I would not recommend this to machinist. For a few dollars more you can buy higher quality, more accurate products.
BOYD D.
Haven't had the opportunity to actually use it yet but it seems to be well made. Looking forward to using it soon
Gordon W.
It is so true and precise...far better than a bubble level!
KEN .
Amazingly accurate on table saw.
David B.
Hi,
I work on vintage vehicles and I used this item for a 1913 Fiat
We are making a new windshield and the brass mounting plates had to be at matching angles
I am a career cabinetmaker and I believe this tool with come in handy
David Budd
Wood by Budd
Cary T.
Wish the magnetic edge was a machined edge.
Julius T.
I have 3 saws set up in tandem to cut truss sections. Every time I change truss style I have to reset my cut angle on each saw. This device is amazing to ensure the exact same repeatable angle for each one. Love it!!
Dave L.
Haven’t used it yet but tested it and I think it will be a good addition to my tool box.
Chris K.
It gives me the ability to dial in a specific cut angle for fine wood working.
Brandon .
Got my saw alot closer than i thought i could
Robin S.
Great for tube work we do a lot of roll cage work , thanks
David N.
I love them they work great
Edward S.
Great tool. Got the angels right first time. Never did that before
Dantia P.
Although my first one arrived with a faulty on/off switch, they were quick to respond to my correspondence and quick to resolve the issue. Love the tool, can't wait to use it here in the next couple of weeks.
bill k.
I received my order in a timely manner. Will definitely buy from craftsman capital again.
Steve B.
Always wanted something small and accurate. Works like a charm.
Linda C.
Just have to my husband for his birthday, he said it's perfect!
mike c.
Concept is great.
Disappointed in quality and fucntion. The buttons are intermittent and display is slow to change readings
Philip A.
I got this thing mainly for the table saw for ocd fine cuts and tuning the saw up. I found immediately that when my blade is supposed to be at 90 degrees it’s really at 89.6 degrees. That matters. Useful tool. Should’ve bought two
james o.
The level box is an accurate time saving tool , but your shipping method is tooooooo slow .
Tom H.
Don’t like that you have to take the battery out when not in use. Do like the magnetic base.
Herbert M.
works as advertised
Rankin B.
I used the angle unit on my miter saw blade to set a slight angle under 90 to cut 45's for moldings to be placed around master bath mirrors. This allowed me to have nice tight joints. Thanks.
Steven S.
Works great I didn’t think i was going to use it as much as i do but i grab it alot
Jerry M.
like the digital deal -- very accurate
Michael M.
Great tool. Very handy for set-ups. Love it. Found it to be very accurate
Bruce C.
Works great. Used to rip some wood at a perfect angle.
Earl V.
have only used once
Scott K.
Love it
Very accurate
Ronald K.
Excellent product and exactly what I was looking for. Great customer service and very impressive delivery service.
Mr. J.
Used it yesterday for the first time on my table saw and it worked great!
Jerry P.
don,t know how to change the heads. never received the wrench when it arrived
William M.
Love the product will find many uses for it. Will be great to add to my tool box.
Ray P.
Surprisingly accurate and takes the guesswork out of getting the job done right the first time.
Gloria P.
exactly what my husband was looking for. Shipped in record time!
Joe W.
Compact design and seems well constructed- haven’t had a chance to use it a lot but I think it will a very useful tool.
Randy H.
better if magnetic
Fred B.
Very pleased with this product. looking forward to purchasing other products from this supplier.
John H.
Nice product. Using it to true my saw blades, grinding (sanding) wheels and tables, and overall anything I can use it on the get correct angles. Very happy with this unit.
Orden O.
Use it to measure angle of horses feet. It is easy to use, although maybe unconventional.
Now would you please ship my order you are holding hostage!
James O.
Fast shipping and exactly what I ordered
Frank A.
Just what they said it does Love it keeps all blades at the right angles!